Cleaning Your Product
Cleaning the product is generally not required, although in some instances it may be necessary if excess dirt, dust, or hair has accumulated, or if minor liquid spillages have occurred on the module during operation or storage.
| CAUTION | |
|---|---|
 | Electric shock or personal injury may occur If there is a dirt or spillage over a ventilation slot, external data/power connector, or product aperture, remove power from the unit without touching the liquid and seek advice before reapplying power. |
- Ensure that the product is switched off and the power cord is removed from the product. Hold the power cable by the plug and do not touch either the plug or the power cord with wet or damp hands, as an electrical shock may result.
- Wipe the product with a clean, dry, and soft cloth. Do not use detergents which contain alcohol, solvent, or surface-active agents. Do not spray water or detergent directly onto the product.
- Mildly dampen a soft and dry cloth in water and wring thoroughly to clean the product as required.
- Dry the product thoroughly once cleaning has finished.
- Reconnect the power cord and use your product as advised once cleaning is complete.
Antimicrobial additive
Our integrated antimicrobial technology within ModIT (made by Clariant) works to continuously minimise the presence of microbes (bacteria, algae, and fungi) throughout the entire lifecycle of the product. This works by having a surface where microbes cannot grow, which in turn reduces the spread of microbes, helping to minimise contact points and reduce the risk of passing on infections and diseases throughout your work environment.